PLOT REPORT
-----------

Report Written : Tuesday, May 02, 2006
Design Path    : C:\Easy-PC\Development\MEDW0006\MEDW0006.pcb
Design Title   : 
Created        : 04/12/2001 17:10:32
Last Saved     : 26/04/2006 18:58:24
Editing Time   : 1076 min
Units          : mm (precision 2)

DEVICE SETTINGS
---------------

---------------
Gerber Settings
---------------

    Leading zero suppression.
    G01 assumed throughout.
    Line termination <*> <CR> <LF>.
    3.3 format absolute inches.

    Format commands defined in Gerber file.
    Aperture table defined in Gerber file.

--------------
Drill Settings
--------------

    Excellon Format 1
    Format 3.3 absolute in inches.
    No zero suppression.


PLOTS OUTPUT
------------
    Plot Job: "C:\Easy-PC\Development\MEDW0006\MEDW0006.EPJ"


Gerber Output
-------------

    "C:\Easy-PC\Development\MEDW0006\Plots\MEDW0006 - Top Silk.gbr"

    Layers:
    -------
    Top Silk

    D-Code    Shape  (thou)
    -----------------------
    D10       Circle 5
    D11       Circle 8
    D12       Circle 10
    D13       Circle 1


Gerber Output
-------------

    "C:\Easy-PC\Development\MEDW0006\Plots\MEDW0006 - Bottom Copper.gbr"

    Layers:
    -------
    Bottom Copper

    D-Code    Shape  (thou)
    -----------------------
    D10       Circle 5
    D12       Circle 10
    D14       Circle 126 Hole 118
    D15       Circle 80 Hole 31
    D16       Finger 60 X 110 Hole 31 Rotation 90
    D18       Circle 79 Hole 31
    D19       Circle 80 Hole 31
    D21       Circle 80 Hole 31
    D22       Circle 120 Hole 39
    D23       Circle 80 Hole 39
    D24       Circle 120 Hole 47
    D25       Circle 98 Hole 47
    D27       Circle 120 Hole 118
    D28       Finger 60 X 110 Hole 31
    D29       Circle 90 Hole 39
    D72       Circle 50
    D73       Circle 15
    D74       Circle 80
    D75       Circle 25
    D77       Circle 80 Hole 39
    D78       Circle 75 Hole 39
    D79       Circle 75 Hole 39
    D80       Finger 85 X 150 Hole 39 Rotation 90
    D81       Finger 63 X 79 Hole 31 Rotation 90
    D82       Circle 71 Hole 31


Gerber Output
-------------

    "C:\Easy-PC\Development\MEDW0006\Plots\MEDW0006 - Bottom Copper (Resist).gbr"

    Layers:
    -------
    Bottom Copper

    D-Code    Shape  (thou)
    -----------------------
    D112       Circle 88
    D113       Circle 83
    D114       Finger 68 X 118 Rotation 90
    D122       Circle 87
    D124       Circle 134
    D126       Circle 88
    D127       Circle 88
    D128       Finger 71 X 87 Rotation 90
    D129       Circle 83
    D130       Circle 128
    D131       Circle 106
    D132       Finger 93 X 158 Rotation 90
    D133       Finger 68 X 118
    D134       Circle 98
    D135       Circle 79


NC Drill Output
---------------

    "C:\Easy-PC\Development\MEDW0006\Plots\MEDW0006 - Drill Data.drl"


    Tool             Size        Count
    ------------------------------------
    T001       000.800 mm          178
    T002       001.000 mm           69
    T003       001.200 mm            9
    T004       003.000 mm            8
    ------------------------------------
    All                            264
    ------------------------------------

End Of Report.