PLOT REPORT
-----------

Report Written : 28/09/2008 19:42:25
Design Path    : C:\Easy-PC\Development\MEDW0006\MEDW0006a.pcb
Design Title   : 
Created        : 04/12/2001 17:10:32
Last Saved     : 28/09/2008 18:42:18
Editing Time   : 1233 min
Units          : mm (precision 2)

DEVICE SETTINGS
---------------

---------------
Gerber Settings
---------------

    Leading zero suppression.
    G01 assumed throughout.
    Line termination <*> <CR> <LF>.
    3.3 format absolute inches.

    Format commands defined in Gerber file.
    Aperture table defined in Gerber file.

--------------
Drill Settings
--------------

    Excellon Format 1
    Format 3.3 absolute in inches.
    No zero suppression.
    Expanded Step & Repeat


PLOTS OUTPUT
------------
    Plot Job: "C:\Easy-PC\Development\MEDW0006\MEDW0006a.EPJ"


Gerber Output
-------------

    "C:\Easy-PC\Development\MEDW0006\Plots\MEDW0006a - Top Silk.gbr"

    Layers:
    -------
    Top Silk

    D-Code    Shape  (thou)
    -----------------------
    D11       Circle 5
    D12       Circle 1
    D74       Circle 10
    D100       Circle 8


Gerber Output
-------------

    "C:\Easy-PC\Development\MEDW0006\Plots\MEDW0006a - Bottom Copper.gbr"

    Layers:
    -------
    Bottom Copper

    D-Code    Shape  (thou)
    -----------------------
    D11       Circle 5
    D15       Circle 80
    D21       Circle 15
    D22       Circle 50
    D74       Circle 10
    D93       Circle 80 Hole 39
    D95       Finger 60 X 110 Hole 31 Rotation 90
    D101       Circle 126 Hole 118
    D102       Circle 80 Hole 31
    D103       Circle 79 Hole 31
    D104       Circle 80 Hole 31
    D105       Finger 63 X 79 Hole 31 Rotation 90
    D106       Circle 75 Hole 39
    D107       Circle 75 Hole 39
    D108       Circle 80 Hole 31
    D109       Circle 120 Hole 39
    D110       Circle 80 Hole 39
    D111       Circle 120 Hole 59
    D112       Circle 98 Hole 47
    D113       Finger 85 X 150 Hole 39 Rotation 90
    D114       Circle 120 Hole 118
    D115       Finger 60 X 110 Hole 31
    D116       Circle 90 Hole 39
    D117       Circle 70 Hole 40
    D118       Circle 25
    D119       Circle 71 Hole 31


Gerber Output
-------------

    "C:\Easy-PC\Development\MEDW0006\Plots\MEDW0006a - Bottom Copper (Resist).gbr"

    Layers:
    -------
    Bottom Copper

    D-Code    Shape  (thou)
    -----------------------
    D120       Circle 134
    D121       Circle 88
    D122       Finger 68 X 118 Rotation 90
    D123       Circle 88
    D124       Circle 87
    D125       Circle 88
    D126       Finger 71 X 87 Rotation 90
    D127       Circle 83
    D128       Circle 83
    D129       Circle 128
    D130       Circle 106
    D131       Finger 93 X 158 Rotation 90
    D132       Finger 68 X 118
    D133       Circle 98
    D134       Circle 78
    D135       Circle 79


NC Drill Output
---------------

    Plated drill holes
    ------------------

    "C:\Easy-PC\Development\MEDW0006\Plots\MEDW0006a - Drill Data.txt"


    Tool             Size        Count
    ------------------------------------
    T001       000.031 in          178
    T002       000.039 in           69
    T003       000.040 in            2
    T004       000.047 in            3
    T005       000.059 in            6
    T006       000.118 in            8
    ------------------------------------
    All                            266
    ------------------------------------

End Of Report.