3D Printer
Created by: Lester Caine, Last modification: 30 November 2018
X5S - 33cm x 33Cm X 40cm build volume
Build Videos
TronXY
- Tronxy X5S printer - Manufacturers build video (Sept 17) ... music only on sound track
- Tronxy X5S assemble video - 2nd Manufacturers build video (Dec 17) ... music only on sound track
- Tronxy X5S timing belt installation - Showing the poor alignment of the stock installation
- Other videos on the YouTube channel
Mr.Crankyface
This is a nice set of video's with a sensible review of the various shortcommings of the TronXY X5S. As indicated, even with the X5S itself, later builds already addressed some points, and the newer models X5ST and X5SA take that even further.
- Putting together a Tronxy X5S CoreXY!
- Wiring and running a Tronxy X5S
- Tronxy X5S heatbed issues/mods (Voltage mod, insulation)
- Tronxy X5S upgrades: belt path, auto bed level, frame reinforcement etc
Nexi Tech
Timelaps assembly video and nice demonstartions of capabilities but for the X5SA spec build.
Peter Oakes
Nice description on upgrades to the machine but a bit long winded. Not sure I would do the same solution, but it identifies the problem areas nicely.
- TronXY X5S Hardware Upgrade belts and head assembly
- X5S Electronics Upgrade