C11BreakoutBoard

Overview

This card has been designed to provide a flexible interface and functions to your computer projects, by using the parallel port control software. This board comes as a response to many customers that have been asking for a faster way to connect devices and reduce the possibility of wiring errors. See the CNC4PC Site page for more details.

Features · Fully optoisolated · Built-in Safety Charge Pump · Built-in Variable Speed Control · All pins can be used in a concurrent manner · Buffered outputs · Status LEDs on all inputs and output connections · Has an extra DB25 female connection for output · Output pins 1, 2, 3, 4, 5, 6, 7, 8, 9, 14, 16, 17. · Input pins 10, 11, 12, 13, 15. · Input and output pins with close by ground connections · Easy installation of an On/Off switch. You can control the card externally · All TTL 5VDC signals · Screw-On connections for all terminals

This board is designed to carry an on board mains switch. We do not recomend using it at 240V and in order to comply with European Regulations it will be disabled!

Documentation

See the CNC4PC site for full details on the board. and are also available.

Prices

We hold a small stock of these boards to supply with the Mach-in-a-box when used with non isolated driver modules. Price for the board in Europe is £85 (+ VAT) The C11g is a slightly cheaper alternative which may be used with the opto-isolated drivers such as Gecho and the Arc Euro Trade modules.