MicroMill2000LE
OUTLINE DESCRIPTION:
The 2000LE & the Industria models have capabilities to produce most everything from very simple 2 dimensional shapes to very complex 3 dimensional geometric sculptured forms in wood, aluminium, steel & plastics. There are many applications in jewellery design and die making, prototyping new products, model making, small part engineering production and engraving. The Industria model is supplied as standard with a fully interlocked totally enclosed guard that conforms to all EU operating safety standards.
RIGID & RUGGED:
Made to high quality and accuracy standards and built with a solid steel frame and ground steel sliding ways with adjustable brass taper gibs.
FAST & PRECISE:
Designed to be simple to use and built to machine with speed and accuracy in a wide variety of materials with impressive performance. Just plug into an output port of your personal computer, load the software and you are ready to go.
| |
Imperial |
Metric |
MOVEMENT AND RANGES: |
|
|
|
X-AXIS TRAVEL |
12" | 305mm |
| Y-AXIS TRAVEL | 6" | 152mm |
| TABLE SIZE (with 3 T SLOTS) | 18 3/8"x31/2" | 467x89mm |
| Z-AXIS TRAVEL | 6" | 152mm |
| TABLE TOP TO SPINDLE END MAXIMUM | 8" | 203mm |
SPINDLE: |
|
|
| SPINDLE SPEED RANGE WITH 6 STEP PULLEY SET |
1,100 - 8,750 RPM |
|
| SPINDLE DRIVE SYSTEM |
COG BELT DRIVE |
|
| SPINDLE HOLE |
0.343" |
8.7mm |
| TOOL MOUNTING COLLET CHUCK |
30 deg included taper |
|
| SPINDLE BEARING DIAMETER |
1.5748/.6692" |
40/17mm |
FEEDRATE: |
|
|
| RAPID FEEDRATE X/Y/Z |
20ipm |
508mm/min |
MOTORS: |
|
|
| MAIN SPINDLE MOTOR |
1/3 HP |
.25 KW |
| FEED MOTORS - TYPE DUAL SHAFT WITH HANDWHEELS |
OPEN LOOP STEPPER MOTOR TORQUE 200 oz - in |
|
| ROTATION |
200 steps / rev |
|
| INPUT POWER |
AC 110V SINGLE PHASE |
|
MACHINE SIZE: 2000 LE |
|
|
| HEIGHT | 26" | 660mm |
| WIDTH | 22" | 559mm |
| DEPTH | 21" | 533mm |
| MASS OF MACHINE | 88 lbs | 40Kg |
| MACHINE COLOUR |
STD BLUE |
|
| MACHINE RESOLUTION | 0.000125" | 0.003mm |
| MACHINE REPEATABILITY | 0.0005" | 0.013mm |
MACHINE CONSTRUCTION: |
|
|
| COLUMN & BED | RIGID SQUARE TUBULAR STEEL | |
| Z AXIS SLIDE | SQUARE STEEL BOX WAYS w/ BRASS TAPERED GIB STRIPS | |
| TABLE | HARD ANODIZED ALUMINIUM | |
| CROSS SLIDE |
HARD ANODIZED ALUMINIUM ON PRECISION GROUND STEEL |
|
| ADJUSTABLE WEAR STRIPS | BRASS | |
| LEADSCREWS | 0.5" (12.7mm) DIAMETER | |
CONTROL DESCRIPTION: |
|
|
| FULL 3 AXIS | PC (> 486) COMPATABLE | |
| DRIVE TYPE | MOSFET BILEVEL CHOPPER | |
| INTERFACE | STD DB25 PARALLEL PRINTER PORT | |
| DIMENSIONS | 10"x8"x5" | 254x203x127mm |