MicroMill3000
The NEW Closed Loop Servo MicroMill DSLS 3000 System is here. Utilizing the latest in Advanced Digital Sync Lock Servo (DSLS) Technology the MicroMill DSLS 3000 can perform machining operations much faster and more accurate then ever before.
DSLS control utilizes a new advanced proprietary mathematical servo control algorithm that locks the encoder feedback pulse signal stream with the command pulse signal stream. If the encoder pulse rate deviates from the commanded pulse rate the algorithm forces the two signals back into synchronization. In this way the commanded velocity and position are always followed. With the addition of an optical encoder this allows a standard open loop stepper motor drive system using step and direction software to be turned into a true closed loop servo system.
| |
Imperial |
Metric |
MOVEMENT AND RANGES: |
|
|
|
X-AXIS TRAVEL |
12" | 305mm |
| Y-AXIS TRAVEL | 6" | 152mm |
| TABLE SIZE (with 3 T SLOTS) | 18 3/8"x31/2" | 467x89mm |
| Z-AXIS TRAVEL | 6" | 152mm |
| TABLE TOP TO SPINDLE END MAXIMUM | 8" | 203mm |
SPINDLE: |
|
|
| SPINDLE SPEED RANGE WITH 6 STEP PULLEY SET |
1,100 - 8,750 RPM |
|
| SPINDLE DRIVE SYSTEM |
COG BELT DRIVE |
|
| SPINDLE HOLE |
0.343" |
8.7mm |
| TOOL MOUNTING COLLET CHUCK |
30 deg included taper |
|
| SPINDLE BEARING DIAMETER |
1.5748/.6692" |
40/17mm |
FEEDRATE: |
|
|
| RAPID FEEDRATE X/Y/Z |
100ipm |
2.5m/min |
| CONTOURING FEEDRATE X/Y/Z |
60ipm |
1.5m/min |
MOTORS: |
|
|
| MAIN SPINDLE MOTOR |
1/3 HP |
.25 KW |
| FEED MOTORS - TYPE DUAL SHAFT WITH HANDWHEELS |
CLOSE LOOP STEPPER MOTOR TORQUE 200 oz - in |
|
| ROTATION |
200 steps / rev |
|
| INPUT POWER |
AC 110V SINGLE PHASE |
|
MACHINE SIZE: 3000 |
|
|
| HEIGHT | 26" | 660mm |
| WIDTH | 22" | 559mm |
| DEPTH | 21" | 533mm |
| MASS OF MACHINE | 88 lbs | 40Kg |
| MACHINE COLOUR |
STD BLUE |
|
| MACHINE RESOLUTION | 0.000125" | 0.003mm |
| MACHINE REPEATABILITY | 0.0005" | 0.013mm |
MACHINE CONSTRUCTION: |
|
|
| COLUMN & BED | RIGID SQUARE TUBULAR STEEL | |
| Z AXIS SLIDE | SQUARE STEEL BOX WAYS w/ BRASS TAPERED GIB STRIPS | |
| TABLE | HARD ANODIZED ALUMINIUM | |
| CROSS SLIDE |
HARD ANODIZED ALUMINIUM ON PRECISION GROUND STEEL |
|
| ADJUSTABLE WEAR STRIPS | BRASS | |
| LEADSCREWS | 0.5" (12.7mm) DIAMETER | |
CONTROL DESCRIPTION: |
|
|
| FULL 3 AXIS | PC (W2k/XP) COMPATABLE | |
| DRIVE TYPE | MOSFET BILEVEL CHOPPER | |
| INTERFACE | STD DB25 PARALLEL PRINTER PORT | |
| DIMENSIONS | 10"x8"x5" | 254x203x127mm |