MicroMillUpgrade
Created by: Administrator, Last modification: 17 May 2010 (08:18 UTC) by Lester Caine
MicroMill Home |
Unit Price |
||
| Excluding VAT | Including VAT | ||
Controller Upgrades: See Microproto Control System Versions for more details |
ex works UK |
||
|
|
Old MPS2000 driven controller upgrade to run with Mach3 windows software using TurboTaig interface board installed at Broadway. |
£ 280.00 | £ 329.00 |
|
Upgrade 2000LE to DSLS3000 with closed loop controller and encoders. Supplying new stepper motor assemblies. |
£ 620.00 | £ 728.50 | |
| Fourth axis upgrade with new motor assembly | £ 150.00 | £ 176.25 | |
|
All upgrades include Mach3 licence, but requires suitable W2k or XP powered computer to run it. (See Mach3 guidelines or buy a Mach-in-a-box and we will do all the work) |
|||
Spindle Upgrades: |
|||
| ER16 Spindle Assembly (without collets) | £ 85.00 | £ 99.86 | |
| ER16 Spindle for use with new head block only - not recommended for older head blocks that have a through pinch bolt |
TBA | TBA | |
 |
ER16 Metric collet set 1mm to 3mm in 0.5mm steps and 4 to 10mm in 1mm steps. 12 piece set with stand. |
£ 70.00 | £ 82.25 |
| See the main pricelist for softare options | |||
MicroMill Home |
|||
