EAS-MicroStep

EAS Microstep is a single axis microstepping chopper driver board for stepper motors. It is based on the National Semiconductor LMD18245 3amp 55volt full bridge motor driver.
Drives 4,6 or 8 wire bipolar/unipolar stepper motors up to 3amps at 55volts per phase.
Can be flash programmed to support half/full steps plus 4, 8 or10* microstep modes.
Adjustable chopper current drive, no large external resisters required for stepper motor current limiting.
Automatic current reduction after 3 minutes of no step pulse activity.
Standard TTL step and direction inputs.
The LMD18245 driver has internal overcurrent and thermal shutdown protection.
HEATSINK is required, but is not included in the kit!

	Microstep Driver PCB ( PCB's are available direct from EAS at $10 + shipping )	£8.00	Out of stock
	Microstep PCB and Component Set Complete with programmed PIC (please select step size required)	£45.00	Out of stock
	Bound Hard Copy User Manual including a schematic and a copy of the Construction Guide	£8.00	Coming soon - see site for details
	European Insured Delivery ( International Signed For )	£4	UK shipping only at present
	Overseas Insured Delivery - Rest of world outside Europe ( International Signed For )	£8.00	UK shipping only at present

Shipping will be added to the order up to £8.50 - please add the additional shipping for Europe (outside the UK) or the Rest of the World.
Paypal will produce a total in your preferred currency at the current conversion rate.

Contact me direct for alternative prices, packages, or the additional parts listed in the complete parts list Lester Caine