Created by: Administrator, Last modification: 17 May 2010 (08:18 UTC) by Lester Caine

MicroMill Home


Unit Price

    Excluding VAT Including VAT

Controller Upgrades: See Microproto Control System Versions for more details

ex works UK


Old MPS2000 driven controller upgrade to run with Mach3 windows software using TurboTaig interface board installed at Broadway.

£ 280.00 £ 329.00

Upgrade 2000LE to DSLS3000 with closed loop controller and encoders.

Supplying new stepper motor assemblies.

£ 620.00 £ 728.50
Fourth axis upgrade with new motor assembly £ 150.00 £ 176.25

All upgrades include Mach3 licence, but requires suitable W2k or XP powered computer to run it.

(See Mach3 guidelines or buy a Mach-in-a-box and we will do all the work)


Spindle Upgrades:


ER16 Spindle Assembly (without collets) £ 85.00 £ 99.86
  ER16 Spindle
for use with new head block only - not recommended for older head blocks that have a through pinch bolt
hr ER16ColletOpen ER16 Metric collet set
1mm to 3mm in 0.5mm steps and 4 to 10mm in 1mm steps.
12 piece set with stand.
£ 70.00 £ 82.25
  See the main pricelist for softare options    

MicroMill Home